Commercial Air Barrier Accessories
-
Aquatac Primer
- Polymer emulsion-based primer for self-adhesive membranes
- Specially designed to provide a high level of tack on vertical surfaces
- Easily spray-applied ; quick drying
- Environmentally friendly due to low VOC content
-
Blueskin Adhesive
- Quick drying, rubber-based adhesive
- Aggressive tack provides superior adhesion of membrane
- Suitable for application at normal and low temperatures
-
Air-Bloc® LF
- Moisture-curing, high solids elastomeric liquid-applied flashing membrane
- Fast curing, single component, easy to install
- Low VOC and low odor
- Excellent compatibility with Henry air barriers, including rubberized asphalt
-
Blueskin® Butyl Flash
- Impermeable to air, moisture vapor and water
- Easy self-adhered application
- Self-sealing when punctured
- Excellent cold weather adhesion
- Highly flexible making installation easy
-
Blueskin TWF
- SBS rubberized asphalt; self-adhered application
- Excellent for use as through-wall flashing
- Strong, durable film; high temperature resistant compound
-
Blueskin Spray Prep - Aerosol
- Rubber-based spray adhesive
- Easily applied; quick setting
- Aggressive tack enhances adhesion of membrane
- Suitable for application at normal and low temperatures
-
-
Henry Blueskin LVC Adhesive
- Quick setting
- Aggressive tack provides improved adhesion of membrane to substrate
- Suitable for application at normal and low temperatures
- Easily applied
-
925 BES Sealant
- External joint sealant for Henry® air barrier, waterproofing and roofing systems
- Excellent weathering resistance, flexibility, very low VOC
-
Blueskin® WB
- Rubberized flashing membrane
- Protection against air infiltration and water damage
- Fast, easy peel and stick application
- Saves energy by preventing draft and air leakage
-
Kop-R-Lastic
- Adheres efficiently, wet or dry, to most building materials and is highly elastic
- Skins over, tack free within 30 minutes
- Offers wide service temperature range
-
Hi-Tac Primer
- Excellent primer for self-adhered waterproofing membranes over insulated concrete forms (ICF)
- Can be used in temperatures as low as -12°C
- Quick setting adhesive
- Aggressive tack provides superior adhesion of membrane
- Easily applied by brush, roller or spray
-
Henry 230-21 Rigid Insulation Adhesive and Vapour Barrier
- For bonding polystyrene, polyurethane, cork, glass foam, fibrous glass to itself, concrete, masonry, wood or metal surfaces
- May also be used for bonding plywood or gypsum board to suitable insulation surfaces
- Used in full coat applications to provide a vapour barrier
-
Polybitume 570-05
- Exceeds the performance standards of conventional asphalt caulking compounds.
- Gun or trowel consistency.
- Remains flexible on aging.
Sorry, there are no products available based on your selection.