Commercial Water Resistive Air Barriers
-
Blueskin® SA and Blueskin® SA LT
- Self-adhered application; excellent adhesion to prepared substrate
- Self-gasketing when penetrated and under compression with self-tapping fasteners
- SBS rubberized asphalt
-
Blueskin® Metal Clad®
- Ideal substrate for adhesion of construction sealants
- UV and weather resistance
- Excellent adhesion to primed surfaces
- 100% solids - No VOC's
-
Blueskin® Metal Clad® LT
- Low temperature application down to 15°F (-9.4°C), without warming product or priming laps
- Can be left exposed for up to 12 months during construction
- Aluminum surfacing offers ideal substrate for adhesion of construction sealants
- High tensile, tear and puncture strength facer resists damage during construction
- Compliant in various NFPA 285 wall assemblies
-
Blueskin® VP160
- Meets highest industry standards for commercial air barriers
- Sheds water while allowing vapour to pass through allowing walls to drain and substrates to dry
- Creates a continuous plane of air-tightness helping to improve building thermal performance
- Fully adheres to substrates eliminating water migration
-
Foilskin
- SBS Rubberized Asphalt; self-adhered application
- Excellent adhesion to prepared substrate
- Self-sealing when penetrated with self-tapping fasteners
-
Air-Bloc All Weather STPE® Fluid Applied Air Barrier
- Rain ready within 30 minutes, helping to reduce job-site weather delays
- Can be exposed for up to 12 months during construction, providing scheduling flexibility
- Permanent UV exposure behind open-joint cladding offers design flexibility
- Part of the fully compatible Air-Bloc® system, including flashings and sealant
- Vapor permeable membrane allows walls to breathe
- Sprayable, one-coat application and high coverage rate for a faster, quicker installation
-
Air-Bloc® 16MR
- Impermeable air and vapour barrier
- Low temperature application 6°C
- Single-Component
- Low VOC content
-
Air-Bloc® 17MR
- Low Temperature Application
- Water-based, elastomeric emulsion
- Water vapor permeable, low VOC content and low odor
- Superior fire resistance according to ASTM E1354 and NFPA 285
-
Air-Bloc® 21
- Synthetic Rubber Adhesive
- Functions as air/vapor barrier and insulation adhesive
- Adheres to most types of insulation
- Can be applied in cold temperatures
-
Blueskin TG
- SBS modified membrane; can be applied at low temperatures
- Light in weight to provide ease of application
- Excellent adhesion to concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, drywall and plywood
- Membrane is self-sealing when penetrated with self-tapping screws
-
Vapor-Bloc SA
- SBS modified membrane can be applied in temperatures as low as –12°C
- Excellent adhesion to prepared substrates of steel decks, gypsum board, concrete, plywood
- Excellent compatibility with Bakor adhesives and air barrier membranes
-
Air-Bloc® 33MR
- Elastomeric emulsion, high water vapor-permeance
- UV-resistant; fire-resistant
- Low VOC content, low odor
- Excellent for use with open face wall cladding
Sorry, there are no products available based on your selection.