LinkedIn Youtube Facebook Twitter Sales Rep Locator Document Search
 

Stone Mason® Instant Patching Cement

Product Description
Technical Literature
Application Tips
and Instructions
Warranty

Ideal for repairing steps, driveways, sidewalks, curbs and patios, Stone Mason® Instant Patching Cement is an extremely strong, quick-setting mortar. Designed for use on interior and exterior concrete and masonry.

Features

  • Exceptionally strong
  • Fast-setting
  • Suitable for interior/exterior repairs

Required Tools and Materials

  • Trowel
  • Sponge
  • Wire brush
  • Mixing pail
  • Stir stick

Data Sheets

Stone Mason® Instant Patching Cement Data Sheet Download PDF      

SDS Sheets

Stone Mason® Instant Patching Cement SDS Sheet Download PDF      
 

Surface Preparation

Remove all cracked, spalled and deteriorated concrete to create a solid surface. Remove loose concrete and rust using a wire brush. Wash the area clean with water. Remove standing water and leave surface damp before applying Instant Patching Cement.

Mixing

Mix only what may be applied within ten minutes. Combine Instant Patching Cement in a bucket with water to achieve a putty like consistency. For a stronger bond, replace water with Stone Mason® Acyli-Bond.

Application

Fill Instant Patching Cement to allow sculpting after product has initially set. After initial setting and within ten minutes, shave excess Instant Patching Cement to desired shape. Allow to harden. Open to foot traffic in four hours.

Temperature

Apply in temperatures between -7°C (20°F) to 49°C (120°F). If Acryli Bond us used as mixing liquid, do not apply if temp is below 5°C (40°F)

The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.