LinkedIn Youtube Facebook Sales Rep Locator Document Search
 

Stone Mason® Ready Mix Concrete Patch

Product Description
Installation and
Technical Literature
Application Tips
and Instructions
Warranty

Stone Mason® Premium Concrete Patch is a water-based mix specially formulated for the repair of holes, cracks and other small imperfections in concrete or masonry surfaces. Offering superior bonding vs. conventional cement patches, Stone Mason® Premium Concrete Patch is also excellent for tuckpointing masonry and brickwork, and as an adhesive to bind broken pieces of concrete or brick.

Features

  • Ready-to-use, fast-drying mix
  • Superior bond and durability
  • Dries to a concrete gray colour
  • Suitable for interior/exterior use

Coverage

  • 946ml (1 qt) covers 0.28 m2 (3 sq ft) at 0.3cm (1/8") thickness

Required Tools and Materials

  • Gloves
  • Putty knife
  • Trowel

SDS Sheets

Stone Mason® Ready Mix Concrete Patch SDS Sheet Download PDF      
 

Steps

  1. Thoroughly clean surface area free from all dust, dirt and other loose materials, using a wire brush if necessary. Stone Mason® All Purpose Concrete Cleaner is recommended to remove oil and grease contamination.
  2. If temperature is 80°F (27°C) or above, dampen area with water mist before applying.
  3. Apply directly from container using a flexible putty knife, broad knife or trowel. Press firmly into patch area, smooth and feather edge. DO NOT OVER TROWEL.
  4. Maximum application thickness is 1/4" (0.6cm). For repairs up to 1" (2.5 cm) deep apply in 1/4" (0.6cm) layers, allowing each layer to dry overnight. Stone Mason® Vinyl Cement Patch is recommended for patches greater than 1" (2.5cm) deep or 3" (7.6cm) wide.
  5. Drying time: Allow 2-3 days for light traffic. Stone Mason® Vinyl Cement Patch is recommended for use in heavier vehicular traffic areas.
  6. Do not apply if rain is expected within 24 hours or if temperature is expected to drop below 40°F (5°C)
  7. Stone Mason® Concrete Crack Filler is recommended to seal joints where joint movement is anticipated.

Clean-Up

Clean hands and tools with soap and water.

The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.