Stone Mason® Ready Mix Floor Patch and Leveler is a ready-to-use, fast-setting, water-based patching and leveling compound for wood and concrete. Use to fill in cracks, seams, joints, nail marks, knot holes and imperfections before installing vinyl, wood, ceramic and other flooring.
Surface must be clean, dry and free from all dust, dirt, oil, wax, grease and other contaminants and must be structurally sound prior to application.
Mix well before using. Apply directly from container using a flexible putty knife or trowel. Press firmly into patch area, smooth and feather edge. Apply up to 6 mm (1/4”) thick and allow to dry completely before applying adhesives or coverings. Drying time will vary with applied thickness, temperature, humidity, etc. For thin applications up to 3 mm (1/8”) thick, let dry 3 to 4 hours. For thicker layers up to 6 mm (1/4”), allow to dry overnight Thicknesses greater than 6 mm (1/4”) should be built up in multiple layers, allowing each layer to dry completely before next application.
Do not apply when temperature is below 10°C (50°F).
Clean hands and tools with soap and warm water while the product is still wet.
Close container. Store in a cool dry place.
Avoid contact with skin and eyes. In case of eye contact, flush thoroughly with water and immediately consult physician. If ingested, consult a physician immediately.
KEEP FROM FREEZING. DO NOT TAKE INTERNALLY.
KEEP OUT OF REACH OF CHILDREN.
The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.