LinkedIn Youtube Facebook Twitter Sales Rep Locator Document Search

Airport Grade™ Driveway Resurfacer

Product Description
Installation and
Technical Literature
Application Tips
and Instructions

Airport Grade™ Driveway Resurfacer smooths and repairs cracked and weathered asphalt surfaces quickly and easily, preparing the surface for Black Knight® Driveway Sealer application.

Data Sheets

Black Knight® Airport Grade™ Driveway Resurfacer Data Sheet Download PDF      

SDS Sheets

Black Knight® Airport Grade™ Driveway Resurfacer SDS Sheet Download PDF      


Remove all dirt and loose material with a stiff brush or water. Clean oil spots and stains with Airport Grade™ Multi-Purpose Cleaner. Stir Driveway Resurfacer thoroughly before each application. Lightly dampen surface; do not leave any standing water. Fill all larger and deeper cracks with Airport Grade™ Asphalt Driveway Crack Filler and allow to dry. Depressions should also be filled with Airport Grade™ Depression Filler. Driveway Resurfacer should then be applied in a layer of up to 6 mm (1/4") thickness; apply firmly with a trowel or putty knife and allow to dry for approximately 24 to 48 hours, or until hard.

Drying Time

Dries in approximately 24 hours. Do not apply when rain is forecasted within 24 hours.


One 3.78 L ( 1 gallon) covers approximately 0.6 m2 (6 sq. ft.) at 6 mm (1/4") thickness.

Clean Up

Clean up equipment and spills before Asphalt Driveway Resurfacer dries with water and/or soap.


Do not apply if temperature is below 10°C (50°F). Not recommended for steeply inclined driveways as surface may become slippery when wet.

Follow label directions.